钻井清洁剂
暂无图片。
钻井清洁剂
Product Overview
Agent for using in drilling mud to prevent drilling with clays is a polyether polyol lubricant. This product has good lubricity and can significantly reduce the lubrication coefficient and adhesion coefficient of drilling fluid. This product is non fluorescent, non-toxic, and does not pollute the environment. It is an excellent lubricant for preparing dual protection drilling fluid and completion fluid. It can be directly added to various water-based drilling fluids, with a recommend dosage of 1%~3%。
Technical Date indicators
Test items |
Standard Specification |
Actual Specification |
Appearance |
Viscose Liquid |
Brown or black Viscose Liquid |
Ionic Nature (surfactant) |
Non Ionic |
Non Ionic |
Density,g/cm3 |
1.00~1.10 |
1.04 |
pH value |
7-10 |
7.5 |
Miscibility |
100% Water Miscible |
100% Water Miscible |
Flash Point |
>70℃ |
>78℃ |
Surface tension of 0.25% (v/v) solution of the sample in Distilled water at 25'C dynes/cms. |
≤35 |
28 |
Mud Lubricity coefficient |
Should not be more than 0.20 |
0.17 |
Foaming Tendency Test 0.1% (v/v) solution of sample in Distilled Water stir for 10 minutes. |
Increase in volume shall be 5%(Maximum) |
4.5% |
Fluorescence level |
Unlimited |
≤5 |
Features
(1) Good lubricity which is equal to oil base lubricant, helps to use in directional and horizontal wells;
(2) Reasonable salt, calcium and magnesium resistance, can be applied in freshwater, saltwater; saturated saltwater and seawater drilling fluids;
(3) Perform well up to 150 ℃, can be applied in deep wells;
(4) Non-toxic and biodegradable, no harm to environment.
Packaging and storage
It is a liquid packaged in 5 gal cans and 55 gal drums. International packaging may vary and they shall be stored in a shady and dry place with good ventilation
Safety
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with water. Handling methods and dangerous data shall be referred to MSDS。